| ¡@ |
¡¹CONTROL PANEL |
¡¹GRINDING PROCEDURES |
| ¡@ |
¡@ |
 |
¡@ |
 MORE.... |
| ¡@ |
|
¡@ |
|
|
¡@
¡@
 |
¡@
¡¹SPECIFICATIONS |
| ¡@ |
¡@ |
|
MODEL |
NC600 |
|
¡õDESCRIPTIONS |
| Table Size |
¡@ |
360x600mm |
| Longitudinal Movement Speed |
0.5~25M/min |
| Cross Transverse Travel |
| Min. Setting Unit |
0.001mm
|
| MPG |
Handwheel graduation x 1, 0.001mm x 10, 0.01mm x 100,
0.1mm |
| Rapid Speed |
1000mm/min
|
| Wheelfeed Vertical Infeed |
| Min. Setting Unit |
0.001mm |
| MPG |
Handwheel graduation0.001mm x 1, 0.001mm x 10, 0.001mm
x 100 |
| Rapid Speed |
750mm/min |
| Spindle Drive |
Power Rating |
Standard 3.7KW(5HP) Optional 5.55KW(7 1/2HP).,
7.4KW(10HP) |
| Speed |
50HZ,1450 R.P.M.;60HZ,1750 R.P.M. |
| Standard grinding
Wheel |
Diameter |
ø304mm |
| Width |
32mm |
| Bore |
ø76.2mm
|
| Hydraulic Motor |
2.0HP |
| Floor Space |
2700x1800x1950mm
|
|
NOTE:
1. |
The
manufacturer reserves the right to modify the design,
specifications, mechanisms, etc., to improve the
performances of the machine without notice. All the
specifications shown above are just for
reference. | |
| |
|
|
¡¹GENERAL
FEATRUES |
| ¡@ |
|
| 1.STRUCTURE: |
|
¢w |
Remote
manual pulse generator for vertical &
crossfeed |
|
¢w |
C3
class vertical & crossfeed
ballscrew |
|
¢w |
Spindle
frequency inverter |
|
¢w |
Verical
& crossfeed servo motor control system,
man-manchine interface w/10.4" color tft display,
plc w/nc mode control |
|
¢w |
Longitudinal
movement servo hydraulic control
system |
|
¡@ |
Unique
longitudinal hydraulic circuitry system is
available for slow movement from either direction
( suitable for big downfeed at slow table movement
) | |
| 2.CONTROL SYSTEM: |
|
¢w |
High
industrial class plc control system w/nc program
mode | |
| 3.SOFTWARE SYSTEM: |
|
¢w |
Man-machone
conversational diagram data input working
system |
|
¢w |
Easy
to learn and operate |
|
¢w |
Learn
it in 4 hours grinding set in 10 minutes for new
workpiece | |
| 4.STANDARD
FUNCTION: |
|
¢w |
Surface
grinding (cross step feed constant feed, and 3
steps downed) |
|
¢w |
Plunge
grinding (2 steps downed) |
|
¢w |
Groove
bottom surface grinding (cross step feed &
constant feed, 2 steps downed) |
|
¢w |
Multi-plunge
grinding system suitable for un-equidepth,
concave, convex, and trapezoidal plunge grinding
(only by cbn forming wheel, forming device, or
on-table wheel derssing
attachment) | |
| 5.DURING GRINDING: |
|
¢w |
The
infeed amount is adjustable any
time |
|
¢w |
The
grinding wheel could be forced rise
up |
|
¢w |
Can be
stopped and proceeded for workpiece
checking |
|
¢w |
Can be
forced for wheel dressing or dressing setting
change | |
| 6.OPTIONAL
ACCESSORIES: |
|
¢w |
Overhead
wheel auto dressing & auto compensation
system |
|
¢w |
On-table
wheel auto dressing & auto compensation
system |
|
¢w |
The
fourth axis scale plate and special clamper for
workpiece | | | | |
