¡@
¡@
 
¡@
¡@
MODEL
ADX8200
Table Size
810x2050mm(32"x80") ¡@
Longitudinal movement of table
(Table speed infinitely variable)		 5~30m/min¡@

¡@

¡@ Longitudinal hydraulic, crossfeed motorized with auto infeed & speed adjustable constant feed, vertical DC servo & step motor controlled, vertical rapid & slow feed, 0.0005mm/0.000025" step feed, step increment:0.001~0.050mm(1~25/10000") are available, vertical auto infeed value: rough grinding 0.001~0.050mm(1~25/10000"); finishing grinding 0.0005~0.0095mm(0.25~9.75/10000"). The functions of setting times for spark-out(1-9times), vertical digital positioning setting (zero point, start grinding point, finishing grinding value, target point, wheel rise point). Auto spark-out then rise up automatically are available.

¡@

¡@ ¡¹CONTROL PANEL ¡¹GRINDING PROCEDURES
¡@ ¡@ ¡@
¡@ ¡@ ¡@ ¡@ ¡@

¡@

¡@

¡@  ¡¹SPECIFICATIONS
¡@ ¡@
MODEL
ADX8200
¡õDESCRIPTIONS
Table Size ¡@
810x2050mm(32"x80")
Max. grinding length Longitudinal
2050mm(81")
Max. grinding width Crosswise
810mm(32")
Max. distance from table surface to spindle centerline
850mm(33.5")
Standard magnetic chuck size
800x1000mm x 2 pieces(31.5"x39.37"x 2 pieces)
Longitudinal movement of table Max. travel, hydraulic 2100mm(82.5")
Max. travel, manual 2200mm(86.5")
Table speed infinitely variable
5~30m/min
Cross transverse travel Auto transverse increment (jog) 1~25mm(0.04"-1")
Auto constant feeding speed 30~280mm/min(1 1/4"~11"/min)
Max. auto transverse travel 870mm(34.25")
Max. manual transverse travel
885mm(34.8")
Handwheel per revolution
5mm(0.2")
Handwheel per graduation
0.02mm(0.001")
Wheelhead vertical infeed Automatic infeed
ADX:rough grinding:0.001~0.050mm(1~25/10000")
finish grinding:0.0005~0.0095(0.25~9.75/10000")
Step feed (Jog)
Jogging downfeed:0.0005mm(0.25/10000")
Jogging step increment:0.001~0.050mm(1~25/10000")
Manual pulse generator
(per graduation)		 0.001mm(0.00005")
Rapid travel, approx 150mm(6")/min
Slow travel, approx. 6mm(0.25")/min
Handwheel revolution, Handwheel graduation min. display value:0.001mm(1/10000")(no elevating handwheel)
Grinding spindle drive Speed
60HZ,1100R.P.M.;50HZ,900R.P.M.
Power rating
Standard:20HP/6P(15KW) Optional:25HP/6P(18.75KW), 30HP(22.5KW)
Standard grinding wheel Diameter
510mm(20")
Width
76mm(3")
Bore
127mm(5")
Hydraulic motor Power rating 7.5HP/6P(5.625KW)
Crossfeed motor Power rating DC 200W/DCV
Elevating motor Power rating DC 200W/DCV
Total space required (L x W x H)
5360x3500x2350mm(211"x138"x93")
Weights Net weight
10200KGS(22440LBS)
Gross weight 12000KGS(22000LBS)
Rated power, Approx. Standard 28H{(21KW)
Optional 33.5HP(25.125KW) / SPINDLE 25HP; 38.5HP(28.875KW) / SPINDLE 30HP
Packing Dimensions L x W x H 7000x3600x3000mm(236"x142"x118.1")

NOTE: 1.

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.