| ¡@ |
Longitudinal hydraulic,
crossfeed motorized with auto infeed & speed adjustable constant
feed, vertical DC servo & step motor controlled, vertical rapid
& slow feed, 0.0005mm/0.000025" step feed, step
increment:0.001~0.050mm(1~25/10000") are available, vertical auto
infeed value: rough grinding 0.001~0.050mm(1~25/10000"); finishing
grinding 0.0005~0.0095mm(0.25~9.75/10000"). The functions of setting
times for spark-out(1-9times), vertical digital positioning setting
(zero point, start grinding point, finishing grinding value, target
point, wheel rise point). Auto spark-out then rise up automatically
are available. |
¡@
| ¡@ |
¡¹CONTROL PANEL |
¡¹GRINDING PROCEDURES |
| ¡@ |
¡@ |
 |
¡@ |
 |
| ¡@ |
¡@ |
¡@ |
¡@ |
¡@ |
|
¡@
¡@
 |
¡@
¡¹SPECIFICATIONS |
| ¡@ |
¡@ |
|
MODEL |
ADX6200 |
|
¡õDESCRIPTIONS |
| Table Size |
¡@ |
610x2060mm(24"x80") |
| Max. grinding length |
Longitudinal |
2060mm(80") |
| Max. grinding width |
Crosswise |
610mm(24") |
| Max. distance from table
surface to spindle centerline |
830mm(32.5") |
| Standard magnetic chuck
size |
600x1000mm(23.6"x39.3") <2
pieces>
|
| Longitudinal movement of
table |
Max. travel, hydraulic |
2100mm(83") |
| Max. travel, manual |
2200mm(86.5") |
| Table speed infinitely variable |
60HZ,5-30m/min, 50HZ,5-25m/min |
| Cross transverse travel |
Auto transverse increment (jog) |
1~25mm(0.04"-1") |
| Auto constant feeding speed |
30~280mm/min(1 1/4"~11"/min) |
| Max. auto transverse travel |
650mm(25.5") |
| Max. manual transverse travel |
670mm(26.3")
|
| Handwheel per revolution |
5mm(0.2")
|
| Handwheel per graduation |
0.02mm(0.001")
|
| Wheelhead vertical infeed |
Automatic infeed |
| ADX:rough
grinding:0.001~0.050mm(1~25/10000") |
| finish
grinding:0.0005~0.0095(0.25~9.75/10000") | |
| Step feed (Jog) |
| Jogging
downfeed:0.0005mm(0.25/10000") | |
| Jogging
step
increment:0.001~0.050mm(1~25/10000") | |
Manual pulse generator
(per graduation) |
0.001mm(0.00005") |
| Rapid travel, approx |
150mm(6")/min |
| Slow travel, approx. |
6mm(0.25")/min |
| Handwheel revolution, Handwheel graduation |
min. display value:0.001mm(1/10000")(no elevating
handwheel) |
| Grinding spindle
drive |
Speed |
60HZ,1100R.P.M.;50HZ,900R.P.M. |
| Power rating |
Standard:10HP/6P(7.5KW)
Optional:15HP/6P(11.25KW)
|
| Standard grinding
wheel |
Diameter |
510mm(20")
|
| Width |
50mm(2")
|
| Bore |
127mm(5") |
| Hydraulic motor |
Power rating |
5HP/6P(3.75KW) |
| Crossfeed motor |
Power rating |
200W/DCV |
| Elevating motor |
Power rating |
200W/DCV |
| Total space required (L x W x H) |
6360x3000x2350mm(250"x118"x93") |
| Weights |
Net weight |
11050KGS(24310LBS) |
| Gross weight |
12200KGS(26840LBS) |
| Rated power, Approx. |
Standard |
17.5HP(13.125KW)
|
| Optional |
22.5HP(16.875KW) |
| Packing Dimensions |
L x W x H |
7000x2290x2470mm(236"x91.6"x98.8") |
|
NOTE:
1. |
The
manufacturer reserves the right to modify the design,
specifications, mechanisms, etc., to improve the
performances of the machine without notice. All the
specifications shown above are just for
reference. | | |
|
|
|
|
