|
¡@
| ¡@ |
¡¹CONTROL PANEL |
¡¹GRINDING PROCEDURES |
| ¡@ |
¡@ |
 |
¡@ |
 |
| ¡@ |
¡@ |
¡@ |
¡@ |
¡@ |
|
¡@
 |
¡@
¡¹SPECIFICATIONS |
| ¡@ |
¡@ |
|
MODEL |
ADX450 |
|
¡õDESCRIPTIONS |
| Table Size |
¡@ |
203x460mm(8x18") |
| Max. grinding length |
Longitudinal |
480mm(19") |
| Max. grinding width |
Crosswise |
228mm(9") |
| Max. distance from table
surface to spindle centerline |
460mm(18") |
| Standard magnetic chuck
size |
200x450mm(8x10") |
| Longitudinal movement of
table |
Max. travel, hydraulic |
480mm(19") |
| Max. travel, manual |
510mm(20") |
| Table speed infinitely variable |
60HZ,5-25m/min,50HZ,5-20m/min |
| Cross transverse travel |
Auto transverse increment (JOG) |
1-10mm(0.04-0.4") |
| Auto constant feeding speed |
60-320mm/min(2 1/2-13"/min) |
| Max. auto transverse travel |
235mm(9 1/4") |
| Max. manual transverse travel |
250mm(9 3/4")
|
| Handwheel per revolution |
5mm(0.2")
|
| Handwheel per graduation |
0.02mm(0.0005")
|
| Wheelhead vertical infeed |
Automatic infeed |
ROUGH GRINDING:0.001~0.050MM(1~25/10000") FINISHING
GRINDING:0.0005~0.0095(0.25~9.75/10000") |
| Step
feed (JOG) |
JOGGING
DOWNFEED:0.0005mm(0.000025")
JIGGING STEP
INCREMENT:0.001~0.050MM(1~25/10000") |
| Manual pulse generator(per graduation) |
0.001mm(0.00005") |
| Rapid travel, approx |
250mm(10")/min |
| Slow travel, approx. |
6mm(0.25")/min |
| Handwheel per revolution, Handwheel per
graduation |
MIN. DISPLAY VALUE:0.001mm(1/10000")(NO ELEVATING
HANDWHEEL) |
| Grinding spindle
drive |
Speed |
60HZ,3450 R.P.M.;50HZ,2850 R.P.M. |
| Power rating |
2.0HP
|
| Standard grinding
wheel |
Diameter |
203mm(8")
|
| Width |
12.7mm(1/2"),MAX. 19mm(3/4") |
| Bore |
31.75mm(1 1/4")
|
| Hydraulic motor |
Power rating |
1.0HP |
| Crossfeed motor |
Power rating |
120W/DCV |
| Elevating motor |
Power rating |
120W/DCV |
| Total space required (L x W x H) |
1810x1285x1680mm(71x50.5x66") |
| Weights |
Net weight |
1205KGS(2651LBS) |
| Gross weight |
1375KGS(3025LBS) |
| Rated power, Approx. |
¡@ |
4HP |
| Packing Dimensions |
L x W x H |
2000x1510x1030mm(79x61x76") |
|
NOTE:
|
The manufacturer
reserves the right to modify the design, specifications,
mechanisms, etc., to improve the performances of
the machine without notice. All the specifications
shown above are just for reference.
|
|
|
|
¡¹GENERAL
FEATURES |
| ¡@ |
|
| 1.COLUMN: |
| Enlarged
column and base create high stability and
rigidity. The height of column is increased up to
18"(460mm) from table surface to the centerline of
spindle (for ADX 450).
| |
| 2.CONSTRUCTION: |
| Construction of table, saddle and base is
casted with high grade casting iron, strongly
ribbed. | |
| 3.SPINDLE: |
| High
precision cartridge type spindle is supported by
two preloaded precision angular contact Ball
bearings & one NN type Roller bearing and
driven by V3 class motor that allow high accurate
grinding performance (for ADX450). Enlarged
spindle set is supported by four preloaded
precision angular contact Ball bearings & one
NU type Roller bearing for heavy duty (for
ADX500-1000). | |
| 4.SLIDEWAYS: |
|
Vertical,
cross (double V) and longitudinal (one & one
flat) slideways are coated with Turcite-B,
provides stable movement and durable
accuracy. | |
| 5.AUTOMATIC CONTINUOUS LUBRICATION
SYSTEM: |
| All slideways and screws are fully oiled by
Automatic Continuous Lubrication System to
eliminate wears on slideways &
screws. | |
| 6.CROSS FEED: |
| Ball screw for cross travel, powered by DC
Servo
motor. | |
| 7.HYDRAULIC TABLE: |
| For all
models, the longitudinal movement is driven by
hydraulic system. With rack and pinion table drive
for hand
operation. | |
| 8.PROXIMITY
SWITCH: |
| Provide
built-in-type (hidden) proximity switch, features
safe and easy
operation. | |
| 9.TABLE SPEED
CONTROL: |
| Presettable hydraulic table speed control
allows operator to pre-set speed rate, enable to
get same speed rate when engaging hydraulic table
every time (for
ADX500-1000). | | | | |
