| ¡@ |
¡¹CONTROL PANEL |
¡¹GRINDING PROCEDURES |
| ¡@ |
¡@ |
 |
|
¡´
|
Plunge & surface
modes as standard |
|
¡´
|
Vertical feed driven
by stepping motor & AC motor |
|
¡´
|
Vertical jog feed:
0.001mm(0.00005") |
|
¡´
|
Auto-downfeed increment:
0.001-0.04mm(0.00005"-0.002") |
|
¡´
|
Max. Auto-downfeed
amount: 9mm(0.45") |
|
¡´
|
Pre-set spark-out:
1-9 times |
|
¡´
|
The wheelhead is
raised and the table parks upon completion of the spark-out
passes |
|
|
¡@ |
 |
¡@
¡@
 |
¡@
¡¹SPECIFICATIONS |
| ¡@ |
¡@ |
|
MODEL |
ESG-1020ASD |
|
¡õDESCRIPTIONS |
| Table Size |
¡@ |
254x508mm(10x20") |
| Max. grinding length |
Longitudinal |
520mm(20 1/2") |
| Max. grinding width |
Crosswise |
280mm(11") |
| Max. distance from table
surface to spindle centerline |
Standard column:500mm(19 5/8"); Optional
high column:600mm(23 5/8") |
| Standard magnetic chuck
size |
250x500mm(10x20") |
| Longitudinal movement of
table |
Max. travel, hydraulic |
580mm(22 3/4") |
| Max. travel, manual |
620mm(24 3/8") |
| Max. travel, infinitely
variable |
60HZ,5-25m/min,50HZ,5-20m/min |
|
|
Auto transverse increment |
1-13mm(0.04"-0.5") |
| Max. auto transverse travel |
270mm(10 5/8") |
| Max. manual transverse travel |
300mm(11 3/4")
|
| Handwheel per revolution |
5mm(0.2")
|
| Handwheel per graduation |
0.02mm(0.001")
|
| Wheelhead vertical
infeed | |
Automatic in feed |
0.001-0.04mm(0.00005-0.002") |
| Step feed (Jog) |
0.001mm(0.00005") |
| Rapid travel, Approx |
150mm/min |
| Slow travel, Approx. |
6mm/min |
| Handwheel revolution |
1mm(0.05") |
| Handwheel graduation |
0.005mm(0.0005") |
| Grinding spindle
drive |
Speed |
60HZ,3450 R.P.M.;50HZ,2850 R.P.M. |
| Power rating |
3.0HP
|
| Standard grinding
wheel |
Diameter |
203mm(8")
|
| Width |
19mm(3/4"),MAX.25mm(1")
|
| Bore |
31.75mm(1 1/4")
|
| Hydraulic motor |
Power rating |
2.0HPx6P |
| Crossfeed motor |
Power rating |
80Wx6P |
| elevating motor |
Power rating |
80Wx6P |
| Floor space |
Total space required |
240x1450x1750mm(94 1/2"x57"x68 1/2") |
| Weights |
Net weight, Approx. |
1810KGS(3982LBS) |
| Gross weight, Approx. |
2160KGS(4752LBS) |
| Rated power, Approx |
¡@ |
5 1/5HP |
| Packing dimensions |
L x W x H |
2480x2060x2100mm(98"x81"x83") |
|
NOTE:
1. |
The
manufacturer reserves the right to modify the design,
specifications, mechanisms, etc., to improve the
performances of the machine without notice. All the
specifications shown above are just for
reference. | |
| |
|
|
¡¹GENERAL
FEATURES |
| ¡@ |
|
| 1.COLUMN: |
| Enlarged,
honeycomb-ribbed column especially suitable for
heavy duty
grinding. | |
| 2.CONSTRUCTION: |
| Construction of table, saddle and base is
casted with high grade iron, strongly
ribbed. | |
| 3.SPINDLE: |
| Enlarged
spindle set is supported by four preloaded
precision angular contact Ball bearings for heavy
duty. | |
| 4.SLIDEWAYS: |
|
Vertical,
cross (double vess) and longitudinal (one vee
&one flat) slideways are coated with
Turcite-B, provides stable movement and durable
accuracy. | |
| 5.AUTOMATIC CONTINUOUS LUBRICATION
SYSTEM: |
| All slideways and screws are fully oiled by
automatic continuous lubrication system to
eliminate wears on slideways &
screws. | |
| 6.CROSS FEED: |
| Ball screw for cross travel, powered by AC
motor. | |
| 7.HYDRAULIC TABLE: |
| Table
speed ranges 5-25m/min. With rack and pinion table
drive for hand
operation. | |
| 8.PROXIMITY
SWITCH: |
| Provide
built-in-type (hidden) proximity switch, features
safe and easy
operation. | |
| 9.TABLE SPEED
CONTROL: |
| Presettable hydraulic table speed control
allows operator to pre-set speed rate, enable to
get same speed rate when engaging hydraulic table
every time. | |
| 10.HAND WHEELS: |
| Zero-setting slip-ring with vernier on
vertical handwheel, and vernier on crossfeed
handwheel. | | |
Enlarged Spindle Set For 1020, 1224
Series |
Honeycomb-ribbed Column |
Table
Speed Control For 1020, 1224 Series
|
Easily-adjustable Hidden Proximity Switch
(Long And Cross) |
Ballscrew For Crossfeed Movement
|
Electrical Box (ASD Type)
|
Elevating Transmission System
|
| |
 Auto
Lubrication System
| | | | |
