 |
¡@
¡¹SPECIFICATIONS |
| ¡@ |
¡@ |
| ¡@ |
| 1A: |
Longitudinal Hydraulic. |
| 2A: |
Longitudinal Hydraulic And Crossfeed
Motorized. |
| 3A: |
Longitudinal Hydraulic, Crossfeed Motorized
And Rapid Up/Down Motorized. |
| ASD: |
Fully Automatic In 3 Axis (X. Y. Z.)
With Stepping Motor For Downfeed, And AC Motor For Rapid
Up/Down. | |
|
MODEL |
ESG-3A1632 |
|
¡õDESCRIPTIONS |
| Table Size |
¡@ |
406x813mm(16x32") |
| Max. grinding length |
Longitudinal |
813mm(32") |
| Max. grinding width |
Crosswise |
410mm(16") |
| Max. distance from table
surface to spindle centerline |
Standard column:630mm(24 3/4"); Optional
high column:720mm(28 5/16") |
| Standard magnetic chuck
size |
400x800mm(15 11/16x31 1/2") |
| Longitudinal movement of
table |
Max. travel, hydraulic |
890mm(35") |
| Max. travel, manual |
930mm(36 1/2") |
| Max. travel, infinitely
variable |
60HZ,5-25m/min,50HZ,5-20m/min |
| Cross transverse travel |
¡´ |
| ¡´ |
|
|
| |
Auto transverse increment |
1~25mm(0.04"-1") |
| Max. auto transverse travel |
430mm(17") |
| Max. manual transverse travel |
460mm(18")
|
| Handwheel per revolution |
5mm(0.2")
|
| Handwheel per graduation |
0.02mm(0.001")
|
| Wheelhead vertical infeed |
¡¹ |
| ¡¹ |
| ¡½ |
| ¡¹ |
| ¡@ |
| ¡@ | |
Automatic in feed |
0.001-0.04mm(0.00005-0.002") |
| Step feed (Jog) |
0.001mm(0.00005") |
| Rapid travel, Approx |
150mm/min |
| Slow travel, Approx. |
6mm/min |
| Handwheel revolution |
1mm(0.05") |
| Handwheel graduation |
0.005mm(0.0005") |
| Grinding spindle
drive |
Speed |
60HZ,1750R.P.M.;50HZ,1450R.P.M. |
| Power rating |
Standard:5HP; Optional:7 1/2HP,10HP |
| Standard grinding
wheel |
Diameter |
355mm(14")
|
| Width |
50mm(2")
|
| Bore |
127mm(5") |
| Hydraulic motor |
Power rating |
3.0HPx6P |
| Crossfeed motor |
Power rating |
80Wx6P |
| Elevating motor |
Power rating |
1/4HPx6P |
| Floor space |
Total space required |
3290x2200x2050mm(130x87x81") |
| Weights |
Net weight, Approx. |
3400KGS(7480LBS) |
| Gross weight, Approx. |
4000KGS(8800LBS) |
| Rated power, Approx |
¡@ |
8 1/2HP(Spindle
motor:5HP),11HP(Spindle motor:7.5HP),13 1/2HP(Spindle
motor:10HP) |
| Packing dimensions |
L x W x H |
2800x2290x2200mm(110x90x88") |
|
NOTE:
1. |
The
manufacturer reserves the right to modify the design,
specifications, mechanisms, etc., to improve the
performances of the machine without notice. All the
specifications shown above are just for
reference. |
| 2. |
Items
marked ¡´ are for 2A. 3A. ASD types
only. |
| 3. |
Items
marked ¡½ are
for 3A. ASD types only. |
| 4. |
Items
marked ¡¹ are
for ASD types
only. | | |
| ¡@ |
¡@ |
|
|
¡¹GENERAL
FEATURES |
| ¡@ |
|
| 1.COLUMN: |
| Enlarged,
honeycomb-ribbed column especially suitable for
heavy duty
grinding. | |
| 2.CONSTRUCTION: |
| Construction of table, saddle and base is
casted with high grade iron, strongly
ribbed. | |
| 3.SPINDLE: |
| Enlarged
spindle set is supported by four preloaded
precision angular contact Ball bearings & one
NU type Roller bearing for heavy duty.
| |
| 4.SLIDEWAYS: |
|
Vertical,
cross (double vess) and longitudinal (one vee
&one flat) slideways are coated with
Turcite-B, provides stable movement and durable
accuracy. | |
| 5.AUTOMATIC CONTINUOUS LUBRICATION
SYSTEM: |
| All slideways and screws are fully oiled by
automatic continuous lubrication system to
eliminate wears on slideways &
screws. | |
| 6.CROSS FEED: |
| Ball screw for cross travel, powered by AC
motor. | |
| 7.HYDRAULIC TABLE: |
| Table
speed ranges 5-25m/min. With rack and pinion table
drive for hand
operation. | |
| 8.PROXIMITY
SWITCH: |
| Provide
built-in-type (hidden) proximity switch, features
safe and easy
operation. | |
| 9.TABLE SPEED
CONTROL: |
| Presettable hydraulic table speed control
allows operator to pre-set speed rate, enable to
get same speed rate when engaging hydraulic table
every time. | |
| 10.HAND WHEELS: |
| Zero-setting slip-ring with vernier on
vertical handwheel, and vernier on crossfeed
handwheel. | | |
Enlarged Spindle Set For 1228, 1232, 1236,
And 16 Series |
Presettable Table Speed Control For 1228,
1232, 1236, And 16 Series |
Ballscrew For Crossfeed Movement
|
|
| |
 Auto
Lubrication System
| | | | |
